SIFTER SIX, KRUVE
Kruve is a professional ground coffee sitfer, which allows you to improve the flavour of your coffee.
The set consists 6 Sieves (Sizes: 200, 300, 400, 600, 800, and 1000μm) and 15 slot sieve holder. It is perfect for pour over brewing methods, such as drip or Chemex.
Grinding coffee is not only about the grinding size adjusted to the brewing method, but also about as equal coffee particles as possible. It gives a better control over extraction and brings out clean flavour. Kruve enables you to remove the fines (too small particles) and boulders (too large particles), keeping perfect grinds separated.
The body consists of three aluminium parts and wooden (bamboo) lid. Inside, there are sieves set on two levels, the lower for the fines, and the upper for the boulders. All parts are perfectly fitted and made from high quality materials.
The use is simple: put the sieves inside, pour in the grinds and shake for 30 - 60 seconds. The fines will drop on the bottom, the boulders will stay on the upper sieve, and the particles of the proper size will accumulate on the lower sieve. To clean the sieves just rinse them with water.
Kruve can also be used for grinder calibration. The manufacturer recommends using particular sieves for different brewing methods. After grinding coffee, sift it with suggested sieves. Aim at achieving 1:1 ratio between fines and boulders. If there are more boulders, grind coffee finer. If it is the other way around, try a coarser grind.
Pour over: 400 - 800μm sieves
French Press: 600 - 1000μm sieves
AeroPress: 500 - 900μm sieves
Moka pot: 350 - 700μm sieves
Drip brewer: 400 - 900μm sieves
Espresso: 250 - 500μm sieves
Cold Brew: 600 - 1100μm sieves
Syphon: 400 - 800μm sieves
All orders are shipped on
Monday, Wednesday and Friday (excluding national Holidays).
Cut-off time is 06:00pm (UTC+1) of the day before shipping days.